E-6B IMMC SCA Aircraft Mechanic 2 - Avionics - Night Shift

Are you ready to put your experience to work at Northrop Grumman? If so, our Defense Systems wants you to join our Team as a SCA Aircraft Mechanic 2 and support a maintenance program with Northrop Grumman in Lake Charles, LA.

The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. This platform, now modified to the E-6B standard, conveys instructions from the National Command Authority to fleet ballistic missile submarines, a mission known as TACAMO ("Take Charge And Move Out").

**These positions are Service Contract Act positions.

**This position will be hired for the night shift.

Your duties include:

• Use knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts

• Use basic knowledge of electrical theory.

• Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

• Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals

• Adjusts, repairs, or replaces electrical wiring system and aircraft accessories

• Use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

• Assemble, modify, and install wire bundles, conductors and other electrical components.

• Use your thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.

• Read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc.

Additional job duties may also include, but are not limited to:

• Maintains, repairs, and modifies aircraft structures and structural components of moderate difficulty

• Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills

• Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components

• Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments

• Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction

• Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems

• Replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment

• Removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft

• Performs preflight, thru-flight, and post-flight maintenance inspections

• Performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.

• You will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Prioritize workload to maintain schedules on assigned projects.

Basic Qualifications:

• High School Diploma or equivalent (GED) and a minimum 6 years experience

• Able to perform work in an approved environment during specified work hours

• Able to change physical locations based upon need (including physical ability to travel)

• Ability to be subject to a variety of physical conditions

• Able to wear respirator or other safety gear

• Ability to be subject to areas which could cause various phobias due to height or closed spaces.

Preferred Qualifications:  

• A&P License

• E-6B/707 aircraft experience

• Able to obtain/maintain a Top Secret DoD clearance

• Experience performing major aircraft modifications

Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.